EMPI
EMPI 1954-1965 VW Beetle & Karmann Ghia Disc Brake Conversion Kit - Front - Bolt-On - 4x130
22-2986-0
Regular price
$320.00
Shipping calculated at checkout.
Factory Based Disc Brake Upgrade
Stock VW Disc Brake Calipers & Rotors
Bolt-on to Original Spindles for Easy Installation
EMPI's Bolt On Front 4x130 4 Lug Disc Brake Kit fits Link Pin Front End VW Beetles from 1954 through 1965 and 1956 through 1956 Karmann Ghias. The kit includes a caliper bracket that mounts to the stock height, drum brake spindle and greatly improves the stopping power for your Vintage VW. The disc brake kit includes 4x130 drilled brake rotors, bearings, spacers & seals, caliper brackets, calipers & pads, mounting hardware and instructions. The bolt on disc brake conversion kit will not fit with stock VW disc brake, drop spindles or disc brake drop spindles.
This Disc Brake Conversion Kit includes the following:
4x130 Lug Pattern Brake Rotors with 14x1.5 Threads
Axle Spacers, Wheel Bearings & Seals
Brake Calipers & Pads
Caliper Mounting Brackets
Mounting Hardware & Instructions
Click here for Quick Bleeder Valves which make bleeding your brakes much easier!
Installation Notes:
Late model Type 1 bearing caps must be used on the disc brake rotors.
All brake parts must be thoroughly cleaned and disc brake grease must be used on all brake pad contact surfaces or brake squeak and vibration may occur.
15" or larger wheels must be used with the disc brake kit. 14" wheels can not be used.
The stock master cylinder can be used with front disc brakes. However, if you are converting to 4 wheel disc brakes, you must install a large bore master cylinder.
Stock VW Disc Brake Calipers & Rotors
Bolt-on to Original Spindles for Easy Installation
EMPI's Bolt On Front 4x130 4 Lug Disc Brake Kit fits Link Pin Front End VW Beetles from 1954 through 1965 and 1956 through 1956 Karmann Ghias. The kit includes a caliper bracket that mounts to the stock height, drum brake spindle and greatly improves the stopping power for your Vintage VW. The disc brake kit includes 4x130 drilled brake rotors, bearings, spacers & seals, caliper brackets, calipers & pads, mounting hardware and instructions. The bolt on disc brake conversion kit will not fit with stock VW disc brake, drop spindles or disc brake drop spindles.
This Disc Brake Conversion Kit includes the following:
4x130 Lug Pattern Brake Rotors with 14x1.5 Threads
Axle Spacers, Wheel Bearings & Seals
Brake Calipers & Pads
Caliper Mounting Brackets
Mounting Hardware & Instructions
Click here for Quick Bleeder Valves which make bleeding your brakes much easier!
Installation Notes:
Late model Type 1 bearing caps must be used on the disc brake rotors.
All brake parts must be thoroughly cleaned and disc brake grease must be used on all brake pad contact surfaces or brake squeak and vibration may occur.
15" or larger wheels must be used with the disc brake kit. 14" wheels can not be used.
The stock master cylinder can be used with front disc brakes. However, if you are converting to 4 wheel disc brakes, you must install a large bore master cylinder.