EMPI
EMPI VW Carburetor Kit - 38EGAS Single - Type 1
47-0628-0
Regular price
$480.00
Sale price
$499.00
Shipping calculated at checkout.
EMPI 38E GAS Carb Kit, complete with Air Cleaner, and Manifold For TYPE 1. End castings sold separately.
This synchronous 2-barrel carb kit is perfect for street and off-road engines and will improve performance over a stock carb.
These kits are designed for Bug, Super Beetle, Karmann Ghia, Thing, Bus, Baja Bugs, and Sandrails, (to 1971 on Bus only). All kits are test run and adjusted for smooth performance.
An AWESOME feature to this carb:
The choke is located away from the fan shroud allowing easy access and will not ground out (electrically) on the fan shroud.
Kits include:
Isolated Center Section Aluminum Intake Manifold featuring a true pre-heat system to fit either dual port with factory style end castings- Part Number: 3236 , or single port with the use of a single port end kit- Part Number: 3237
Air Filter with High Flow Gauze Element
Electric Choke
Fuel Line
Uni-Link Linkage and Hardware
Detailed and Illustrated Instructions
Base-line jetted for 1600cc. WILL require jetting to match your engine's specific needs.
The EGAS Carburetor Kit is not designed to be used with a stock fuel pump. An electric pump is recommended by EMPI. The kit, and specifically the intake manifold brace can be modified and used along a billet distributor clamp to flip the bracket and it can be used once it is clearanced for the inlet out outlet of an alternator style fuel pump.
Fuel Pressure MUST be set at 1.5 to 2 psi max! The 38EGAS carburetor is very susceptible to flooding out, with hesitation and stumbling off idle if the fuel pressure is too high. Before doing ANY tuning of the carburetor, make sure the fuel pressure is set and checked with a pressure gauge to less than 2 PSI.
NOTE:
In some instances, when installed with an alternator style charging system, the carburetor may (slightly) interfere with the large end of the alternator. A 5.5mm Carburetor Spacer can be used to lift the carburetor up to clear the alternator.
FACTORY JETTING:
45 IDLE JET
145 MAIN JET
170 AIR JET
F50 E TUBE
65 PUMP
This synchronous 2-barrel carb kit is perfect for street and off-road engines and will improve performance over a stock carb.
These kits are designed for Bug, Super Beetle, Karmann Ghia, Thing, Bus, Baja Bugs, and Sandrails, (to 1971 on Bus only). All kits are test run and adjusted for smooth performance.
An AWESOME feature to this carb:
The choke is located away from the fan shroud allowing easy access and will not ground out (electrically) on the fan shroud.
Kits include:
Isolated Center Section Aluminum Intake Manifold featuring a true pre-heat system to fit either dual port with factory style end castings- Part Number: 3236 , or single port with the use of a single port end kit- Part Number: 3237
Air Filter with High Flow Gauze Element
Electric Choke
Fuel Line
Uni-Link Linkage and Hardware
Detailed and Illustrated Instructions
Base-line jetted for 1600cc. WILL require jetting to match your engine's specific needs.
The EGAS Carburetor Kit is not designed to be used with a stock fuel pump. An electric pump is recommended by EMPI. The kit, and specifically the intake manifold brace can be modified and used along a billet distributor clamp to flip the bracket and it can be used once it is clearanced for the inlet out outlet of an alternator style fuel pump.
Fuel Pressure MUST be set at 1.5 to 2 psi max! The 38EGAS carburetor is very susceptible to flooding out, with hesitation and stumbling off idle if the fuel pressure is too high. Before doing ANY tuning of the carburetor, make sure the fuel pressure is set and checked with a pressure gauge to less than 2 PSI.
NOTE:
In some instances, when installed with an alternator style charging system, the carburetor may (slightly) interfere with the large end of the alternator. A 5.5mm Carburetor Spacer can be used to lift the carburetor up to clear the alternator.
FACTORY JETTING:
45 IDLE JET
145 MAIN JET
170 AIR JET
F50 E TUBE
65 PUMP